12-10 Setup
12.5 Network Preset
12.5.1 Local TCP/IP
NOTE DO Not edit IP address in Network Preset page as the network task is executed,
otherwise it fails. View if there is any undergoing task in task manager of the
system.
This page is used for setting network property of the ultrasound system, which is also
applicable for DICOM function.
Open the page via “[Setup]->[Network Preset]”.
Local TCP/IP setting items are described as follows:
Name Description
Current Network
Adapter
To choose the local connection or wireless adapter.
DHCP/ Static
DHCP/Static: If “DHCP” is selected, IP address will be
automatically obtained from DNS server; if “Static” is selected
(using static IP address), you need to enter the IP address.
IP Address
IP Address: IP address of the system should be at the same
network segment with the service IP address.
Subnet Mask
Used to set different network segment.
To Next Page
Loading...
Need help?
General
