2-6 System Overview
z Probes.
z Footswitch.
z Printers: SONY UP-20, SONY UP-D897, SONY UP-897MD, MITSUBISHI P93W-Z,
SONY UP-D898MD, SONY UP-X898MD
NOTE: If the ultrasound system can not recognize the SONY UP-X898MD and SONY UP-
D898MD printers automatically, you may need to change the settings on the
printer: push <PUSH ENTER> to enter the main menu and select [DIGITAL]-
>[DRIVER], and select [897].
WARNING:
This system complies with IEC60601-1-2:2007, and its RF
emission meets the requirements of CISPR11 Class B. In a
domestic environment, the customer or the user should
guarantee to connect the system with Class B peripheral devices;
otherwise RF interference may result and the customer or the
user must take adequate measures accordingly.
To Next Page
Loading...
Need help?
General
