Mindray uMEC12 Operator's Manual

6
12 Monitoring NIBP .......................................................................................................... 12-1
12.1 Introduction ............................................................................................................. 12-1
12.2 Safety ...................................................................................................................... 12-2
12.3 Measurement Limitations ........................................................................................ 12-2
12.4 Measurement Methods ............................................................................................ 12-3
12.5 Setting Up the NIBP Measurement ......................................................................... 12-3
12.5.1 Preparing the Patient ...................................................................................... 12-3
12.5.2 Preparing to Measure NIBP ........................................................................... 12-3
12.5.3 Starting and Stopping Measurements ............................................................. 12-4
12.5.4 Correcting the Measurement if Limb is not at Heart Level ............................ 12-4
12.5.5 Enabling NIBP Auto Cycling and Setting the Interval ................................... 12-5
12.5.6 Starting a STAT Measurement ........................................................................ 12-5
12.6 Understanding the NIBP Numerics ......................................................................... 12-6
12.7 Making NIBP Analysis ............................................................................................ 12-7
12.8 Changing NIBP Settings ......................................................................................... 12-7
12.8.1 Setting the Initial Cuff Inflation Pressure ....................................................... 12-7
12.8.2 Setting NIBP Alarm Properties ...................................................................... 12-8
12.8.3 Displaying NIBP List ..................................................................................... 12-8
12.8.4 Setting the Pressure Unit ................................................................................ 12-8
12.8.5 Switching On NIBP End Tone........................................................................ 12-8
13 Monitoring Temp .......................................................................................................... 13-1
13.1 Introduction ............................................................................................................. 13-1
13.2 Safety ...................................................................................................................... 13-1
13.3 Making a Temp Measurement ................................................................................. 13-1
13.4 Understanding the Temp Display ............................................................................ 13-2
13.5 Setting the Temperature Unit .................................................................................. 13-2
14 Monitoring IBP (for uMEC12/uMEC15) ................................................................... 14-1
14.1 Introduction ............................................................................................................. 14-1
14.2 Safety ...................................................................................................................... 14-1
14.3 Zeroing the Transducer ........................................................................................... 14-2
14.4 Setting Up the Pressure Measurement .................................................................... 14-3
14.5 Understanding the IBP Display ............................................................................... 14-4
14.6 Changing IBP Settings ............................................................................................ 14-5
14.6.1 Changing a Pressure for Monitoring .............................................................. 14-5
14.6.2 Setting the Pressure Label Order .................................................................... 14-6
14.6.3 Setting Alarm Properties ................................................................................ 14-6
14.6.4 Changing Averaging Time .............................................................................. 14-6
14.6.5 Setting Up the IBP Wave ................................................................................ 14-6
14.6.6 Setting the Pressure Unit ................................................................................ 14-7
14.7 Troubleshooting ...................................................................................................... 14-7
15 Monitoring Cardiac Output (for uMEC12/uMEC15) .............................................. 15-1

Mindray uMEC12 Specifications

General

Type	Patient Monitor
Display	12.1-inch color TFT
ECG	3-lead
SpO2	Yes
NIBP	Yes
Respiration	Yes
Temperature	Yes
Battery	Rechargeable lithium-ion
Networking	Ethernet
Parameters	ECG, SpO2, NIBP, Respiration, Temperature
Connectivity	Ethernet
Battery Life	Up to 4 hours
Power Supply	100-240 VAC, 50/60 Hz