Mindray uMEC12 - Showing;Hiding the Help; Setting the Date and Time; Adjusting Volume

3-9
3.9.4 Showing/Hiding the Help
The patient monitor provides online help information. The user can display or hide the help
as required.
1. Select [Main Menu][Screen Setup >>].
2. Select [Help] and toggle between [On] and [Off].
3.9.5 Setting the Date and Time
1. Select [Main Menu][Maintenance >>][System Time >>].
2. Set the date and time.
3. Select [Date Format] and toggle between [yyyy-mm-dd], [mm-dd-yyyy] and
[dd-mm-yyyy].
4. Select [Time Format] and toggle between [24h] and [12h].
If your patient monitor is connected to a central monitoring system (CMS), the date and time
are automatically taken from that CMS. In that case, you cannot change the date and time
settings on your patient monitor.
CAUTION
z Changing date and time will affect the storage of trends and events and may cause
data missing.
3.9.6 Adjusting Volume
Alarm Volume
1. Select the [Alarm Setup] QuickKey[Others], or [Main Menu][Alarm
Setup >>][Others].
2. Select [Alm Volume] and then select the appropriate volume: X-10, in which X is the
minimum volume, depending on the set minimum alarm volume (refer to 7Alarms), and
10 the maximum volume.