Mindray uMEC12 Operator's Manual

3-13
3.11.4 Demo Mode
In Demo mode, the monitor can demonstrate its major functions when patient or patient
simulator is not connected. The Demo mode is password protected.
To enter the Demo mode:
1. Select [Main Menu][Maintenance >>].
2. Select [Demo >>]. Enter the required password and then select [Ok].
To exit the Demo mode, select [Main Menu][Maintenance >>][Exit Demo].
WARNING
z The Demo mode is for demonstration purpose only. To avoid that the simulated
data are mistaken for the monitored patient’s data, you must not change into
Demo mode during monitoring. Otherwise, improper patient monitoring and
delayed treatment could result.
3.11.5 Standby Mode
In standby mode, you can temperately stops patient monitoring without turning off the
monitor. To enter the standby mode, select the Standby QuickKey
.

Mindray uMEC12 Specifications

General

Type	Patient Monitor
Display	12.1-inch color TFT
ECG	3-lead
SpO2	Yes
NIBP	Yes
Respiration	Yes
Temperature	Yes
Battery	Rechargeable lithium-ion
Networking	Ethernet
Parameters	ECG, SpO2, NIBP, Respiration, Temperature
Connectivity	Ethernet
Battery Life	Up to 4 hours
Power Supply	100-240 VAC, 50/60 Hz