EasyManuals Logo

Mindray uMEC12 Operator's Manual

Mindray uMEC12
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #207 background imageLoading...
Page #207 background image
25-1
25 Maintenance
WARNING
z Failure on the part of the responsible individual hospital or institution employing
the use of this equipment to implement a satisfactory maintenance schedule may
cause undue equipment failure and possible health hazards.
z The safety checks or maintenance involving any disassembly of the equipment
should be performed by professional servicing personnel. Otherwise, undue
equipment failure and possible health hazards could result.
z No modification of this equipment is allowed.
z Do not open the equipment housings. All servicing and future upgrades must be
carried out by the service personnel.
z If you discover a problem with any of the equipment, contact your service
personnel or us.
z The service personnel must be properly qualified and thoroughly familiar with the
operation of the equipment.
25.1 Regular Inspection
Before the first use, after your patient monitor has been used for 6 to 12 months, or whenever
your patient monitor is repaired or upgraded, a thorough inspection should be performed by
qualified service personnel to ensure the reliability.
Follow these guidelines when inspecting the equipment:
 Make sure that the environment and power supply meet the requirements.
 Inspect the equipment and its accessories for mechanical damage.
 Inspect all power cords for damage, and make sure that their insulation is in good
condition.
 Make sure that only specified accessories are applied.
 Inspect if the alarm system functions correctly.
 Make sure that the recorder functions correctly and the recorder paper meets the
requirements.
 Make sure that the batteries meet the performance requirements.
 Make sure that the patient monitor is in good working condition.
In case of any damage or abnormity, do not use the patient monitor. Contact the hospital’s
biomedical engineers or your service personnel immediately.

Table of Contents

Other manuals for Mindray uMEC12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mindray uMEC12 and is the answer not in the manual?

Mindray uMEC12 Specifications

General IconGeneral
TypePatient Monitor
Display12.1-inch color TFT
ECG3-lead
SpO2Yes
NIBPYes
RespirationYes
TemperatureYes
BatteryRechargeable lithium-ion
NetworkingEthernet
ParametersECG, SpO2, NIBP, Respiration, Temperature
ConnectivityEthernet
Battery LifeUp to 4 hours
Power Supply100-240 VAC, 50/60 Hz

Related product manuals