EasyManuals Logo

Mindray uMEC12 Operator's Manual

Mindray uMEC12
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
4-3
4.2.2 Manually Admitting a Patient
To manually admit a patient:
1. Select the [Patient Setup] QuickKey, or [Main Menu][Patient Setup >>].
2. Select [Admit Patient] or [Quick Admit].
 [Admit Patient] to fully admit a patient so that you can clearly identify your
patient, on recordings, reports and networking devices.
 [Quick Admit] if you do not have the time or information to fully admit a patient.
Complete the rest of the patient demographic details later. Otherwise, the
symbol will always be displayed in the patient information area.
3. If a patient has been admitted at present, select [OK] to discharge the current patient.
If .no patient is admitted, you can choose either:
 [Yes] to apply the data in your patient monitor to the new patient, or
 [No] to clear any previous patient data.
4.3 Managing Patient Information
4.3.1 Editing Patient Information
To edit the patient information after a patient has been admitted, or when the patient
information is incomplete, or when you want to change the patient information:
1. Select the [Patient Setup] QuickKey, or [Main Menu][Patient Setup >>].
2. Select [Patient Demographics] and then make the required changes.
3. Select [Ok].
4.3.2 Querying and Obtaining Patient Information
The monitor can obtain patient information from HIS through eGateway. To query or obtain
patient information from HIS,
1. Select [Main Menu]Ä—[Maintenance >>]Ä—[User Maintenance >>]Ä—enter the
required passwordÄ—[Network Setup >>]Ä—[Gateway Comm Setup >>], and set [IP
Address] and [Port]. Set [ADT Query] to [On].
2. Click patient information area to enter the [Patient Demographics] menu.
3. Select [Obtain Patient Info. >>] to enter the [Obtain Patient Information] menu.
4. Input query condition and then select [Query]. The monitor will display the obtained
patient information.

Table of Contents

Other manuals for Mindray uMEC12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mindray uMEC12 and is the answer not in the manual?

Mindray uMEC12 Specifications

General IconGeneral
TypePatient Monitor
Display12.1-inch color TFT
ECG3-lead
SpO2Yes
NIBPYes
RespirationYes
TemperatureYes
BatteryRechargeable lithium-ion
NetworkingEthernet
ParametersECG, SpO2, NIBP, Respiration, Temperature
ConnectivityEthernet
Battery LifeUp to 4 hours
Power Supply100-240 VAC, 50/60 Hz

Related product manuals