EasyManuals Logo

Mindray uMEC12 Operator's Manual

Mindray uMEC12
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
5-4
2. The popup menu shows the existing configurations on the monitor. Selecting [Config.
on USB drive >>] will show the existing configurations on the USB drive. Select the
desired configuration and then select the [Edit] button. The following menu appears.
3. Select [Alarm Setup >>], [Screen Setup >>] or [Parameter >>] to enter the
corresponding menu in which settings can be changed. The changed items of alarm
setup will be marked in red.
4. You can select [Save] or [Save as] to save the changed configuration. Select [Save] to
overwrite the original configuration. Select [Save as] to save the changed configuration
in another name.
5.6 Deleting a Configuration
1. Select [Delete Config. >>] in the [Manage Configuration] menu.
2. The popup menu shows the existing user configurations on the monitor. Selecting
[Config. on USB drive >>] will show the existing user configurations on the USB drive.
Select the user configurations you want to delete and then select [Delete].
3. Select [Yes] in the popup.

Table of Contents

Other manuals for Mindray uMEC12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mindray uMEC12 and is the answer not in the manual?

Mindray uMEC12 Specifications

General IconGeneral
TypePatient Monitor
Display12.1-inch color TFT
ECG3-lead
SpO2Yes
NIBPYes
RespirationYes
TemperatureYes
BatteryRechargeable lithium-ion
NetworkingEthernet
ParametersECG, SpO2, NIBP, Respiration, Temperature
ConnectivityEthernet
Battery LifeUp to 4 hours
Power Supply100-240 VAC, 50/60 Hz

Related product manuals