Mindray uMEC12 Operator's Manual

24-3
To clean your equipment, follow these rules:
1. Clean the display screen using a soft, clean cloth dampened with a glass cleaner, making
sure that no cleanser is dripping from the cloth.
2. Clean the exterior surface of the equipment using a soft cloth dampened with the cleaner,
making sure that no cleanser is dripping from the cloth.
3. Wipe off all the cleaning solution with a dry cloth after cleaning if necessary.
4. Dry your equipment in a ventilated, cool place.
24.3 Disinfection
Disinfect the equipment as required in your hospital’s servicing schedule. Cleaning
equipment before disinfecting is recommended.
24.4 Sterilization
Sterilization is not recommended for this monitor, related products, accessories, or supplies
unless otherwise indicated in the Instructions for Use that accompany the products,
accessories or supplies.

Mindray uMEC12 Specifications

General

Type	Patient Monitor
Display	12.1-inch color TFT
ECG	3-lead
SpO2	Yes
NIBP	Yes
Respiration	Yes
Temperature	Yes
Battery	Rechargeable lithium-ion
Networking	Ethernet
Parameters	ECG, SpO2, NIBP, Respiration, Temperature
Connectivity	Ethernet
Battery Life	Up to 4 hours
Power Supply	100-240 VAC, 50/60 Hz