Mindray uMEC12 Operator's Manual

19-1
19 Calculations
19.1 Introduction
The calculation feature is available with your patient monitor. The calculated values, which
are not directly measured, are computed based on the values you provide.
Your can perform the following calculations:
 Dose calculations
 Hemodynamic calculations
To perform a calculation, select [Main Menu][Calc >>], or the [Calculations] QuickKey
and then select the calculation you want to perform.
NOTE
z The calculation feature is independent of other monitoring functions and can be
therefore used for patients being monitored by other monitors. Any operation in a
calculation window does not affect the patient monitoring by the local patient
monitor.
WARNING
z After the calculation is finished, verify the entered values are correct and the
calculated values are appropriate. We assume no responsibility for any
consequences caused by wrong entries and improper operations.

Mindray uMEC12 Specifications

General

Type	Patient Monitor
Display	12.1-inch color TFT
ECG	3-lead
SpO2	Yes
NIBP	Yes
Respiration	Yes
Temperature	Yes
Battery	Rechargeable lithium-ion
Networking	Ethernet
Parameters	ECG, SpO2, NIBP, Respiration, Temperature
Connectivity	Ethernet
Battery Life	Up to 4 hours
Power Supply	100-240 VAC, 50/60 Hz