Mindray uMEC12 Operator's Manual

15-6
15.5 Measuring the Blood Temperature
As shown below, the blood temperature is measured with a temperature sensor at the distal
end of the catheter in the pulmonary artery. During C.O. measurements, blood temperature
alarms are suppressed to avoid false alarms. They will automatically recover as soon as the
C.O. measurements are completed.
15.6 Changing C.O. Settings
15.6.1 Setting the Temperature Unit
Select [Unit Setup >>] from the [User Maintenance] menu. In the popup menu, select
[Temp Uni t ] to toggle between [
ć
] and [

].
15.6.2 Setting Alarm Properties
Select [Alarm Setup >>] from the [C.O. Setup] menu. You can set alarm properties for this
parameter in the popup menu.
Balloon
Sensor
Pulmonary artery
Right atriu
m
Right ventricle
PA cathete
r

Mindray uMEC12 Specifications

General

Type	Patient Monitor
Display	12.1-inch color TFT
ECG	3-lead
SpO2	Yes
NIBP	Yes
Respiration	Yes
Temperature	Yes
Battery	Rechargeable lithium-ion
Networking	Ethernet
Parameters	ECG, SpO2, NIBP, Respiration, Temperature
Connectivity	Ethernet
Battery Life	Up to 4 hours
Power Supply	100-240 VAC, 50/60 Hz