Mindray uMEC12 Operator's Manual

14-8
Symptoms Possible Cause Correction Action
Abnormally high or
low readings
Transducer too High or too Low. Adjust the position of the transducer
and make sure that it is level with the
heart, approximately at the level of
the midaxillary line.
Zero the transducer as described in
14.3 Zeroing the Transducer.
Unable to Zero Stopcock not open to atmosphere. Check the transducer and make sure
the stopcock is turned to the air.

Mindray uMEC12 Specifications

General

Type	Patient Monitor
Display	12.1-inch color TFT
ECG	3-lead
SpO2	Yes
NIBP	Yes
Respiration	Yes
Temperature	Yes
Battery	Rechargeable lithium-ion
Networking	Ethernet
Parameters	ECG, SpO2, NIBP, Respiration, Temperature
Connectivity	Ethernet
Battery Life	Up to 4 hours
Power Supply	100-240 VAC, 50/60 Hz