160
19 DATA LOGGING FUNCTION
19.3 Procedure for Using
10. Specify the logging operation when the mode transfers to RUN mode
*1
. Select "Auto Start" this time, and click [Next].
*1 For details on the setting details, refer to the following table.
Page 188 Setting the operation at the time of transition to RUN
11. Check the set details, give any name
*1
, and click [Finish].
*1 For details on the setting details, refer to the following table.
Page 876 Finish
Writing the data logging setting
1. Insert an SD memory card into the CPU module, and turn on the power.
2. Write the data logging settings to the data memory or SD memory card.
[Online] [Write Logging Setting]
3. Click [Write].
To Next Page
Loading...
