862
APPX
Appendix 8 How to Use CPU Module Logging Configuration Tool
View
■Display language change
The CPU Module Logging Configuration Tool supports multiple languages, and can be used by changing the display language
for menus and so on at the same computer.
[View] [Switch Display Language (Display Language)]
Text may be cut off if the OS and set display language differ.
Online
The online operation enables users to read/write/remove the data logging settings, view the data logging status, and operate
the data logging file.
■Transfer setup
The following window specifies the communication route between the CPU module and a personal computer.
[Online] [Transfer Setup]
*1 Only FX5UJ CPU module is supported.
Item Description
RS-232C COM Port Configure the COM port and transmission speed used for connection with an RS-
232C communication cable.
• COM Port: COM1 to COM63
• Transmission Speed: 9.6kbps / 19.2kbps / 38.4kbps / 57.6kbps / 115.2kbps
Transmission Speed
USB
*1
Configure when connecting with a USB cable.
Ethernet Connection via hub IP Address Configure the IP address and host name used for connection via a hub with an
Ethernet cable.
Host Name
Direct Connection Adapter For direct connection with the Ethernet cable, select the Ethernet adapter that is
connected directly to the CPU module. The IP address of the selected Ethernet
adapter is displayed as the IP address.
IP Address
Communication Time Check Specify the communication time.
Retry Count Specify the number of retries.
[Communication Test] button This button checks the communication status.
To Next Page
Loading...
