870
APPX
Appendix 8 How to Use CPU Module Logging Configuration Tool
Collection
The following window configures the collection interval and/or collection start conditions ( Page 170 Data collection
conditions)
Data
The following window configures the various items such as data format of the target collection device.
Item Description Setting range Default
Each scanning cycle Select this item to collect scan data obtained for each
scan operation.
Time specification Select this checkbox to collect data at a timing when
the first END processing is done after the specified
time interval is elapsed.
ms: 10 to 32767
s: 1 to 86400
10 ms
Condition specification Specify the data collection timing according to the
device data conditions.
Page 171 Condition specification
To Next Page
Loading...
