APPX
Appendix 8 How to Use CPU Module Logging Configuration Tool
875
A
*1 Date and/or time can be added in any format by using the following character strings.
Year: YYYY for four-digit expression; YY for two-digit expression
Month: MM
Day: DD
Day of the week: ddd (Sunday: Sun, Monday: Mon, Tuesday: Tue, Wednesday: Wed, Thursday: Thu, Friday: Fri, Saturday: Sat)
Hour: hh
Minute: mm
Second: ss
Example: for June 18, 2014 (Wednesday), 09:30:15, YYYYMMDDdddhhmmss 20140618Wed093015_00000001.BIN
Also when using the additional information simply as a character string rather than the above format, any character string can be added
by enclosing it with double-quotation marks (" ").
Example: when adding the character string "address" to the file name, "address" address_00000001.BIN can be used.
*2 Maximum of 64 characters (including underscore (_), serial number (eight digits), period, and extension) can be used. However, when
specifying a character string that contains double quotation marks (" "), the maximum number reduces by the number of the double
quotation marks.
*3 When the device data is used for the saved file name, it is recommended that the latch device is used because the saved file may be
created after the PLC stops.
*4 Reducing the setting value results in frequent file switching, so that it is possible that the scan time and/or the device processing time
can be extended.
Logging operation
The following window specifies the data logging operation when the mode transfers to RUN mode (Page 188 Setting the
operation at the time of transition to RUN)
Item Description Setting range Default
Operation at transition to RUN Select the operation when the mode transfers to RUN
mode.
• Auto Start
• Start by User Operation
Auto Start
To Next Page
Loading...
