8 FUNCTION LIST
91
8
*1 An SD memory card module is required.
Data backup/restoration function Backs up program files, parameter files, and device/label
data files in a CPU module to an SD memory card. The
backup data can be restored as needed.
*1
Page 207
Real-time monitor function Monitors the data in the specified device of the CPU
module at a specified interval or at a desired timing in
real time.
Page 227
Memory
card
function
SD memory card
forced stop
Makes the SD memory card unavailable without turning
OFF the power even when the function accessing the SD
memory card is executed.
*1
Page 229
Boot operation Transfers the file stored in the SD memory card to the
transfer destination memory judged automatically by the
CPU module when the power is turned ON or is reset.
*1
High-speed
input/output
function
High-speed counter
function
Performs high-speed counter, pulse width measurement,
input interruption, etc. by using the input of the CPU
module or high-speed pulse input/output module.
Page 233
Pulse width
measurement
function
Page 302
Input interrupt
function
Page 73
PWM output function Executes a PWM output by using the transistor output of
the CPU module or high-speed pulse input/output
module.
Page 329
Positioning function Executes positioning operation by using the transistor
output of the CPU module or high-speed pulse input/
output module.
Page 341
Analog function Uses the analog input function and analog output so that
voltage input/voltage output can be performed.
Page 571
PID control via instruction function Performs PID control by the PID instruction. Page 595
PID control via parameter function Performs PID control (standard PID control, heating-
cooling PID control) by using GX Works3 parameters.
Page 633
IP filter function Identifies the IP address of external devices over
Ethernet, and blocks access from an invalid IP address.
MELSEC iQ-F FX5
User's Manual
(Communication)
Built-in Ethernet function An Ethernet related function such as connection to
MELSOFT products and GOTs, socket communication,
file transfer function (FTP server, FTP client), Web server
(HTTP), SNTP client, and simple CPU communication
function.
MELSEC iQ-F FX5
User's Manual
(Communication)
CC-Link IE Field Network Basic
function
Exchanges data between the master station and remote
station using general-purpose Ethernet.
CC-Link IE Field Network
Basic Reference Manual
Serial communication function A function related to the serial communication such as
N:N Network, parallel link, MC protocol, inverter
communication function and non-protocol
communication.
MELSEC iQ-F FX5
User's Manual
(Communication)
MODBUS communication function Connection with the products which support MODBUS
RTU/TCP is available. The master and slave functions
can be used.
MELSEC iQ-F FX5
User's Manual
(Communication)
SFC function Executes programs written in sequential function chart
(SFC).
MELSEC iQ-F FX5
Programming Manual
(Program Design)
Function Description Compatible CPU module Reference
FX5S FX5UJ FX5U/
FX5UC
To Next Page
Loading...
