9 - 8
9.3 Utility Display
9.3.1 Display operation of main menu
(1) Prohibited simultaneous 2-point presses on the GT1595-X
In the case of using a GT1595-X, do not touch 2 points or more on the GOT
screen simultaneously.
Touching 2 points or more simultaneously may activate a part other than the
touched point.
(2) When setting menu call key to 1-point
When having set [Pressing time] of the menu call key setting screen to other than
"0 (s)", keep pressing the touch panel for the period set to [Pressing time] or more
before leaving the finger from the touch panel.
For menu call key setting, refer to the following.
11.5 Utility Call Key Setting
(3) When touching special function switch (utility)
If you touch the special function switch (utility) while user-created screen is displayed, the main
menu is displayed.
The special function switch (utility) can be set as a touch switch that is displayed on a user-created
screen by GT Designer3 or GT Designer2.
For the details of the special function switch, refer to the following.
GT Designer3 Version1 Screen Design Manual (Functions) (2.7 Setting Special
Function Switch)
GT Designer2 Version Screen Design Manual
(6.2.5 Setting items of special function switch)
Main menu
Special function switch
(Utility)
To Next Page
Loading...
Need help?
General
