9.3 Utility Display
9.3.1 Display operation of main menu
9 - 9
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
Locking the utility display by password
When you try to display the utility main menu while the password is set to the GOT
by GT Designer3 or GT Designer2, the display for password input will be appeared.
(The password setting of GT Designer3 is in the common menu.
The password setting of GT Designer2 is in the common menu.)
When the password is not matched, displays the error message.
When touching , the screen returns to the monitor screen.
(1) Input operation of password
1)Input the password after touching to , to key.
2)Define the password by touching key, after password input.
3)To correct the input character, touch key to delete the correcting character
and reinput/retype the new character.
(2) Password input cancel operation
When button is touched, it returns to the monitor screen.
Refer to the following for the details related to the password setting.
• GT Designer3 Version1 Screen Design Manual (Fundamentals)
• GT Designer2 Version Screen Design Manual
Enter
To Next Page
Loading...
