Mitsubishi GOT1000 GT15 - Page 229

10.1 Communication Setting
10.1.4 Communication setting display operation
10 - 9
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
2 Channel number setting operation
1 Touch channel number specification menu BOX to be set.
2 The cursor for the channel number specification menu BOX is displayed.
Simultaneously the keyboard for a numerical input is displayed.
3 Input the channel number from the keyboard and touch key, and the value is defined.
Simultaneously, the name of the communication driver corresponding to the channel number assigned
by GT Designer3 or GT Designer2 is displayed in the driver display BOX.
keyboard
Enter