13.4 Alarm Information
13.4.4 Alarm information operation
13 - 33
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
4 Copy operation
Copies the selected file.
1 Touch and select the file to copy.
2 If touch button, the message
[Please select a destination.] is displayed
in the left bottom of the screen.
3 If the copy destination folder is touched,
the screen display is changed to the folder
of copy destination.
At this time, it cannot be copied into the
same folder where the file exists.
Select other folders.
4 If touch button, the following dialog
shown left is displayed.
5 Touch button.
If there is a file of the same name in the
copy destination folder, the following
dialog is displayed without starting the
copy.
If touch the button, overwrites the
file.
If touch button, cancels to copy.
6 When the copy is completed, the dialog of
completion is displayed.
If touch button, closes the dialog.
To Next Page
Loading...
