13.4 Alarm Information
13.4.4 Alarm information operation
13 - 35
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
(1) Historical graph display
• Displays the generated time ( ), confirmed time ( ) and restored ( ) time of each alarm.
• Displays the time scales by 30 minutes interval in the bottom of the graph.
• The alarms generated in the order of registering alarm are displayed.
• By the name of each alarm, the contents set for the message of the general alarms by GT
Designer3 or GT Designer2 are displayed with up to 12 characters of full-size character (up to 24
half-size characters).
The 13th of full-size character and after (the 25th and after for half-size character) are not
displayed.
• The graph displays the alarm within up to 26 lines in one screen.
(2) Tally graph display
• Displays the generated frequency of each alarm by the sideways bar chart.
• By the name of each alarm, the contents set for the message of the general alarms by GT
Designer3 or GT Designer2 are displayed with up to 12 characters of full-size character (up to 24
half-size characters).
The 13th of full-size character and after (the 25th and after for half-size character) are not
displayed.
• The graph displays the alarm within up to 26 lines in one screen.
To Next Page
Loading...
