Mitsubishi GOT1000 GT15 - Page 441

14.8 NETWK Unit Status Display
14.8.3 Display example of the NETWK unit status display
14 - 29
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
(5) Link scan time information
Displays the link scan time.
(6) Host station line status
Displays the connection status of the CC-Link IE Controller Network communication unit
No. Item Description
(9)
Current LS time Displays the current link scan time.
Max. LS time Displays the maximum link scan time.
Min. LS time Displays the minimum link scan time.
Constant LS time Displays the link scan time set in the parameter.
No. Item Description
(10)
Connction
Displays the connection status of the host station.
Other than GT155
Normal
IN: Loop Back (OUT: cable disconnection)
IN: Loop Back (OUT: connecting a line)
IN: Loop Back (OUT: wrong cable connection)
OUT: Loop Back (IN: cable disconnection)
OUT: Loop Back (IN: connecting a line)
OUT: Loop Back (IN: wrong cable connection)
Disconnect (IN: cable disconnection, OUT: cable disconnection)
Disconnect (IN: cable disconnection, OUT: connecting a line)
Disconnect (IN: cable disconnection, OUT: wrong cable connection)
Disconnect (IN: connecting a line, OUT: cable disconnection)
Disconnect (IN: connecting a line, OUT: connecting a line)
Disconnect (IN: connecting a line, OUT: wrong cable connection)
Disconnect (IN: wrong cable connection, OUT: cable disconnection)
Disconnect (IN: wrong cable connection, OUT: connecting a line)
Disconnect (IN: wrong cable connction, OUT: wrong cable connction)
GT155
Normal
OUT: cable disconnection
OUT: connecting a line
OUT: wrong cable connection
IN: cable disconnection
IN: connecting a line
IN: wrong cable connection
Disconnect
IN: cable disconnct
count
0: No error, 1 or more: Number of accumulated errors
IN: line err count 0: No error, 1 or more: Number of accumulated errors
OUT: cable disconnct
count
0: No error, 1 or more: Number of accumulated errors
OUT: line err count 0: No error, 1 or more: Number of accumulated errors