Mitsubishi GOT1000 GT15 - Page 440

14 - 28
14.8 NETWK Unit Status Display
14.8.3 Display example of the NETWK unit status display
(3) Data link information
Displays the data link information (Com Status, Cause of Ssp, Cause of Stop) of the CC-Link IE
Controller Network communication unit.
(4) Transient status
Displays the number of transient transmission errors and the error codes.
No. Item Description
(4) Com Status
Displays the communication status of the host station.
D-Link in prog.
D-Link stopped
B-Pass exec
B-Pass stopped
Testing Offline
Offline
(5) Cause of Ssp
Displays the cause of the interrupted communication (transient transmission) of the host station.
Normal Comm
Cable disconnection
Wrong cable connection
Checking cable IN/OUT
Disconnecting/returning to system
Offline
Offline test
Self-check mode
(6) Cause of Stop
Displays the cause of the interrupted data link (cyclic transmission) of the host station.
Normal Comm
StopOrder
D-Link observation timer time up
Testing Line
Param not rcvd
Host out of range
Host reservation
Dup Host No.
Dup CtrlSta
Sta.No. not set
Invalid NETWK No.
Param Err
Params in comm.
CPU stop error
CPU pwr stp err
No. Item Description
(7) Transmission Err Displays the number of transient transmission errors.
(8) ErrCode
Other than GT155
The histories of 16 latest errors
are displayed in 16 rows in
reverse chronological order.
GT155
Only the latest error is displayed
in one row.