14 - 46
14.11 Operator Information Management
14.11.1 Operator management
(e) For enabling the setting of [Make
a permanent password], touch
the check box for [Make a
permanent password], and then
the setting is switched.
: Disabled
: Enabled
(f) For using the external
authentication ID, touch the
check box "Use ext. auth. ID" and
switch the setting.
: The external authentication
ID is not used.
: The external authentication
ID is used.
(g) Touch Ext.auth ID to display the
external authentication ID input
dialog box, and enter the external
recognition ID.
When the input is completed,
touch the key.
When the authentication method
is set to "Fingerprint auth" or
"External auth (general)", the
external authentication ID can be
input with the external
authentication device.
3 Touch the button after all items are
input, and then the dialog box shown left is
displayed and the input operator
information is added.
4 Touch the button or the button,
and then the dialog box shown left is
displayed.
Enter
Cancel
To Next Page
Loading...
