14.11 Operator Information Management
14.11.1 Operator management
14 - 47
9
UTILITY FUNCTION
10
COMMUNICATION
INTERFACE
SETTING
11
DISPLAY AND
OPERATION
SETTINGS
12
CLOCK SETTINGS
AND BATTERY
STATUS DISPLAY
13
FILE DISPLAY AND
COPY
14
GOT SELF CHECK
15
CLEANING OF
DISPLAY SECTION
16
MAINTENANCE
TIME NOTIFICATION
SETTING
(2) Edit operation
Edit the operator information stored in the GOT.
1 Select the operator information to be edited
with touching the operator information.
2 Touch the button.
3 The Operator information edit screen is
displayed, and then touch an item to be
edited.
(a) Level
(b) Password
(c) Make a permanent password
(d) Use ext. auth. ID
(e) Ext.auth. ID
For how to edit operator information, refer
to the following.
this section (1) Add operation
4 Touch the button after all items are
input, and then the dialog box shown left is
displayed and the input operator
information is changed.
5 Touch the button or the
button, and then the dialog box shown left
is displayed.
Cancel
To Next Page
Loading...
