14 - 56
14.11 Operator Information Management
14.11.3 Function setting
3 Function setting operation
1 Touch [Function setting] in the operator
setting menu, and then the Admin
password authentication dialog box is
displayed.
2 Input the administrator password.
Character types to be input can be changed
with touching the following buttons.
Alphabet capital
Alphabet small letter
Numeric
When the input is completed, touch the
key.
3 When the administrator password is
correctly input, the Function setting screen
in displayed.
Touch an item to be set.
(a) Automatic logout time
(b) Auth method
(c) Password expiration date
(d) Initial position input
(e) Valid byte count input
(a) Touch [Automatic logout time],
and then the Automatic logout
time edit dialog box is displayed.
Input the time.
When the input is completed,
touch the key.
(b) Authentication method
Switch the authentication
method.
Touch the item to switch the
display between [Operator name
+ password] [External auth
(general) ] [Fingerprint auth]
[Operator name + password].
To Next Page
Loading...
Need help?
General
