Mitsubishi GOT1000 GT15 - Page 471

14.12 Fingerprint authentication
14.12.2 Operating the fingerprint authentication
14 - 59
9
UTILITY FUNCTION
10
COMMUNICATION INTERFACE SETTING
11
DISPLAY AND OPERATION SETTINGS
12
CLOCK SETTINGS AND BATTERY STATUS DISPLAY
13
FILE DISPLAY AND COPY
14
GOT SELF CHECK
15
CLEANING OF DISPLAY SECTION
16
MAINTENANCE TIME NOTIFICATION SETTING
(3) Administrator password setting operation
Set the administrator password for fingerprint ID.
1 Touch [Administrator password setting] in
the Fingerprint information management
screen.
2 The dialog box shown left is displayed.
Input the pre-registered administrator
password and touch the key.
(Up to 16 alphanumeric characters)
Touch the key to return to the
[Fingerprint information management]
screen.
3 Touch the key to display the dialog
box shown left.
Input a new administrator password and
touch the key.
(Up to 16 alphanumeric characters)
Touch the key to return to the
[Fingerprint information management]
screen.
4 Touch the key to display the dialog
box shown left.
Input a new administrator password again
and touch the key.
(Up to 16 alphanumeric characters)
Touch the key to return to the
[Fingerprint information management]
screen.
Enter
Enter
Enter
Enter
Enter