3.2 Performance Specifications
3.2.4 GT1565-V, GT1562-VN
3 - 15
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
SPECIFICATIONS
4
PART NAME AND
SETTINGS
5
EMC AND LOW
VOLTAGE
DIRECTIVE
6
INSTALLATION
7
WIRING
8
OPTION
*3 The GOT screen saving/backlight off function prevents images from becoming permanently etched on the display
screen and increases the backlight life.
*4 ROM in which new data can be written without deleting the written data.
*5 Compliant with IP67 when the USB environmental protection cover is attached. Compliant with IP2X at the USB
interface only when a USB cable is connected. Note that this does not guarantee all users' operation
environment.
In addition, the GOT may not be available for use in the environment where oil or chemicals are splashed over for
a long period or where oil mist is filled.
*6 For using multiple extension units, a bar code reader, or a RFID controller, the total current for the extension
units, bar code reader, or RFID controller must be within the current that the GOT can supply.
For the current for the extension units, bar code reader or RFID controller, and the current that the GOT can
supply, refer to the following manual.
• GOT1000 Series Connection Manual for GT Works3 and a controller used
•
GT Designer2 Version Screen Design Manual (2.8 Multi-channel Function)
*7 To use a stylus pen, the following specifications must be met.
Material: Polyacetal resin
Tip radius: 0.8mm or more
To Next Page
Loading...
Need help?
General
