COMPONENTS SERVICE-POWER
WINDOW
U’,
-+
POWER WINDOW MOTOR
Removal
1. Detach the regulator assembly. (Refer to GROUP 23.)
2. Disconnect the power window motor from the regulator
assembly. ( 18Y4 15)
Caution
tVhen loosening the connecting screws of the regulator and
the motor assembly, the compressed force of the regulator
spring may cause the regulator arm to spring up.
Inspection
Connect the motor terminals directly to the battery and
check that the motor operates smoothly.
Next, reverse the polarity and check that the motor operates
smoothly in the reverse direction.
lW145
8-167
To Next Page
Loading...
