TROUBLESHOOTING
WINDSHIELD WIPERS AND WASHER
1 Wipers do not operate
I
,
I ,ā
Are the main fusible link and
the sub fusible link OK?
No
Yes
Is fuse No. 8 OK?
Yes
Is 12 V indicated between each.
of the various wires (0.85-L,
LO, LB) and ground when a
test probe is inserted from the
back of the wiper motor
connector?
Yes
No
Is 12 V indicated between each
wire (LO and LB) and ground
when a test probe is inserted
from the back of the column
switch connector?
No
Yes
Is there 12 V between 2-B wire
of column switch connector
and ground when wiper switch
is set to ā1ā and ā2ā?
Repair the harness and
replace the fusible link
I
Repair the harness and
replace the fuse
I
Correct the connector or repair
the harness
Replace the $iper motor
I
I
_ _
I
Correct connector or replace
column switch
1 {F between wiper
switch and ground or improperl)
Correct harness or ground
* connection
8-52