cl
-+
TROUBLESHOOTING
3-POINT ELR SEAT BELTS
WITH TENSION RELIEFERS
Seat belt tension defer system
G
lYes
Is 12 V indicated between the
0.3-RL wire (LH.) or RL wire
(R.H.) and ground when the
seat belt solenoid is removed
and a test probe is inserted from
the‘back of the connector?
i””
Does tension reliefer system
operate when one end of test
probe is inserted into the 0.3-YB
wire from the back of the seat
belt solenoid connector and the
other end of the test probe is
grounded?
Does tension reliefer system
operate when the belt switch is
disconnected and the 0.3-YB
wire is grounded?
I
Yes
.Short-circuited wiring harness
k]gyring harness, burnt
Repair the harness and replace
c
the fuse
No
A broken harness between the
fuse block: and the seat belt
solenoid; or a poor connection
No
Repair the harness or correct
the connection
Replace the seat belt assembly
A broken harness between the
seat belt’solenoid and the belt
Repair the harness or correct
the connection
switch, or a poor connection
c
r 1
r 1
A poor connection of the belt
switch connector, or belt switch
malfunction
t-
Correct the connection or
replace the belt switch
8-72