COMPONENT
SERVICE-STARTING SYSTEM
FRONT AND REAR BRACKET BUSHINGDIRECT DRIVE
TYPE
1. Inspect bushing for wear or burr. If bushing is worn or
burred, replace front bracket assembly or rear bracket
assembly.
REASSEMBLY
Direct drive tvDe
Reassemble starter motor in the reverse order of disassembly
with the following exception.
1. Using a suitable pulling tool, pull overrunning clutch
stop ring over snap ring.
Reduction drive typ
5EL026
Snab ring
lEL013
Reduction drive type
gear v
5EL027
To Next Page
Loading...
Need help?
General
