3-80
Memory Switch 71 – Operation
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 1 Print TCR with the original
page during memory
transmission when the result
is NG
0: No
1: Yes
For easy identification, the first page of a document
stored for memory transmission will print along a
TCR when the transmission result is NG.
4 0 Factory use only
3 1 Print TCR with the original
page during memory
transmission when the result
is OK
0: No
1: Yes
For easy identification, the first page of a document
stored for memory transmission will print along a
TCR when the transmission result is OK.
2 0 Factory use only
1 0 Factory use only
0 0 Display modem speed
0: No
1: Yes
The transmit/receive speed is displayed in the LCD.
Memory switch71 … Print TCR with the original page
Switch 3 0 1
Switch 5 0 1 0 1
When Memory transmission was OK, … No No Yes Yes
When Memory transmission was NG, … No Yes No Yes
When all broadcast transmissions were OK, … No No Yes Yes
When some broadcast transmissions were NG, … No Yes No Yes
Memory Switch 72 – Operation
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 1 Erase polled document
0: No
1: Yes
Determines if a document stored for polling is
erased after being polled.
0 1 Print TCR after the batch
transmission
0: No
1: Yes
Determines if printing the confirmation report after
completing the batch transmission.
Memory Switch 73 ~ 89 – Factory use only