Muratec F-315 Field Engineering Manual

3-90

Unique Switch 00 — Dialer
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 1 Congestion tone detection
0: No
1: Yes
Setting this switch to “0” ignores telephone line
congestion tones.
5 0 Ring back tone wait time
(seconds)
3.0 3.3 3.6 3.9
Sets the time until the ring back tone begins after
answering an incoming call in the Fax/Tel Ready or
Tel/Fax Ready mode.
4 1 Switch 5: 0 0 1 1
Switch 4: 0 1 0 1
3 0 Factory use only
2 0 Factory use only
1 0 Factory use only
0 0 Factory use only
Unique Switch 01 — Dialer
Switch
Initial
Setting
Adjust Usage/Comments
7 0
6 0
First displayed symbol when
pressing <Pause/Dial Opt.>
key
Chara. switch 7 switch 6
/P 0 0
– 0 1
/T 1 0
/P 1 1
Determine what character will be displayed first
when pressing <Pause/Dial Opt.> key.
/P : Dialling pause
– : Hyphen
/T : Cignal Change
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 1 Enable the dial prefix key
0: No
1: Yes
0 0 Factory use only
Unique Switch 02 ∼ 09 – Factory use only

Muratec F-315 Specifications

General

Brand	Muratec
Model	F-315
Category	All in One Printer
Language	English