3-106
Unique Switch 72 – Operation
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 1 Factory use only
4 0 Factory use only
3 1 Effect charge setting in
department mode
0: No
1: Yes
When this bit is set to “1”, the following available:
y Input the price rate per page for transmission
y Print transmission charge on the department list
2 0 Factory use only
1 0 Factory use only
0 0
Transmit the consumables
order sheet automatically
0: No
1: Yes
When both Unique Switch bit 8 and this bit set to
“1”, the machine automatically transmit the
consumables order sheet to the registered
distributor’s office.
It does not print the consumable order sheet.
Note: For this feature to work correctly, you must
register several items. See “3.17 Consumable order
sheet’” page 3-138.
Unique Switch 73 – Operation
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Print consumable order sheet
0: No
1: Yes
If this switch is set to “1”, the machine will print the
consumable order sheet automatically when the
drum cartridge is near end of its design life or the
toner cartridge is near empty.
Note: For this feature to work correctly, you must
register several items. See “3.17 Consumable order
sheet’” page 3-138.
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 1 Factory use only
2 0 Factory use only
1 1 Factory use only
0 0 Factory use only