Muratec F-315 Field Engineering Manual

3-108
Unique Switch 80 ∼ 84 – Factory use only
Unique Switch 85 – Miscellaneous
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Print/Send the consumable
order sheet when the drum is
near end
0: Yes
1: No
When both bit 0 of Unique SW 72 and 7 of Unique
SW 73 is set to “1”, the setting will be reflected to
this switch.
Note: For this feature to work correctly, you must
register several items. See “3.17 Consumable
order sheet” page 3-138.
5 0 Print/Send the consumable
order sheet when toner is
near empty
0: Yes
1: No
When both bit 0 of Unique SW 72 and 7 of Unique
SW 73 is set to “1”, the setting will be reflected to
this switch.Note: For this feature to work correctly,
you must register several items. See “3.17
Consumable order sheet” page 3-138.
4 0 Factory use only
3 0 “Next doc” default setting
when scanning with ADF
0: No
1: Yes
Determine the default setting for “Next doc”
scanning with ADF.
If it is set to “0” the default setting for Next doc is
“No”, if is “1” the setting is “Yes”.
2 1 “Next doc” default setting
when scanning with FBS
0: No
1: Yes
Determine the default setting for “Next doc”
scanning with FBS.
If it is set to “0” the default setting for Next doc is
“No”, if is “1” the setting is “Yes”.
1 0 Factory use only
0 0 Factory use only
Unique Switch 86 – Factory use only
Unique Switch 87 – Miscellaneous
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 0 Print the sending document
on the error message sheet
0: No
1: Yes
1 0 Factory use only
0 0 Factory use only
Unique Switch 88 ∼ 95 – Factory use only

Muratec F-315 Specifications

General

Brand	Muratec
Model	F-315
Category	All in One Printer
Language	English