6-10
12. Use the nippers to carefully punch out the panel on the option cover.
13. Reattach the covers and the harness.
14. Wind the ferrite core around the LAN cable.
15. Attach the NETWORK label.
16. Connect the LAN cable.
NETWORK
17. Turn the power on.
If a DHCP (Dynamic Host Configuration Protocol) server is installed on your network, the installation
is over.
If a DHCP (Dynamic Host Configuration Protocol) server is not installed on your network, proceed to
step 18.
18. Press <Menu>, <6>, <1>, <1>, <Enter>.
DHCP Setting :On
/ /Enter
19. Press <
> and <Enter>.
DHCP Setting :Off
/ /Enter
To Next Page
Loading...
Need help?
General
