3-73
Memory Switch 40 – Scanner
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 0 Factory use only
2 1 Factory use only
1 0 Factory use only
0 1 Document TX length limit
0: 3.6 meters
1: 1 meter
Setting to unlimited will override document jam
sensing.
Memory Switch 41 ∼ 59 ––– Factory use only
Memory Switch 60 – Remote reception
Switch
Initial
Setting
Adjust Usage/Comments
7 0 Factory use only
6 1 CML relay off time after
dialing
0: 1 sec
1: 200 ms
When dialing from the keypad, phone line noise
may occur as the CML relay switches on and off.
Set this switch to “0” to avoid this.
5 0 DTMF tones heard through
handset
0: No
1: Yes
Determines if DTMF tones are produced through
the handset in off–hook dialing.
4 0 Factory use only
3 0 Factory use only
2 0 Factory use only
1 0 Factory use only
0 0 Factory use only