4.Select[ON]andpress[Enter].
5.Select[E-mailMailAddress1].
6. Enter the e-mail addressandpress[Enter].
7.Tosendtheservicereporttoanotherlocation,press[E-mailAddress2]and/or[E-mailAddress3]
andenterthelocation.Otherwise,skiptostep8.
8.Select[E-MailSubject].
9.Editthee-mailsubjectifneeded,andpress[Enter].
10. Press <Reset> to go back to the stand by mode.
To Next Page
Loading...
Need help?
General
