9 Device data memory EFA-200/-300
9-2
Measurement axis Sect. 8.4 Isotropic
Measurement units Sect. 8.5 T (Tesla)
Visible alarm Sect. 8.1.3 OFF
Audible alarm (BEEP) Sect. 8.1.3 OFF
Alarm threshold, B-field Sect. 8.1.2 10 mT
Alarm threshold, E-field Sect. 8.1.2 100 kV/m
Alarms threshold referred to limit value curve Sect. 8.1.2 70%
Selection list, band-pass filters Sect. 8.7.2 BP1 = 16.7 Hz
BP2 = 50 Hz
BP3 = 60 Hz
BP4 = 150 Hz
BP5 = 250 Hz
BP6 = 400 Hz
Selection list, stop-band filters Sect. 8.7.2 BS1 = 16.7 Hz
BS2 = 50 Hz
BS3 = 60 Hz
BS4 = 150 Hz
BS5 = 250 Hz
BS6 = 400 Hz
Selection list, fundamental frequency Sect. 8.8.2 FUND1 = 16.7 Hz
FUND2 = 50 Hz
FUND3 = 60 Hz
FUND4 = 150 Hz
FUND5 = 250 Hz
FUND6 = 400 Hz
Averaging parameter (NAVG) Sect. 8.6 4
Time / Format Sect. 8.8.2 24 h
Date / Format Sect. 8.8.3 DD.MM.YY
Current value recording Sect. 8.2.3 OFF
MEM menu
Start time Sect. 7.1.2 00:00:00
Stop time Sect. 7.1.2 23:59:59
Step time Sect. 7.1.2 00:01:00
Parameter Section Value
Table 9-1 Factory Default Setup
To Next Page
Loading...
