11 Remote control EFA-200/-300
11-18
Spatially assigned measurements
for Field Strength, Exposure STD modes only
Write / action
commands
Read commands Range of values of p Meaning or units
of p
Change to limitation point “A“
C256 – – GOTO POS A
Calculate next measurement position
C230 – – UP
Calculate previous measurement position
C232 – – DOWN
Define / read XA coordinate matrix
C128 0 <p> C129 0 -99 to 999 XYZ EDIT
Define / read YA coordinate matrix
C128 1 <p> C129 1 -99 to 999 XYZ EDIT
Define / read ZA coordinate matrix
C128 2 <p> C129 2 -99 to 999 XYZ EDIT
Define / read XB coordinate matrix
C128 3 <p> C129 3 -99 to 999 XYZ EDIT
Define / read YB coordinate matrix
C128 4 <p> C129 4 -99 to 999 XYZ EDIT
Define / read ZB coordinate matrix
C128 5 <p> C129 5 -99 to 999 XYZ EDIT
Table 11-12 Remote control commands, spatially arranged measurements
To Next Page
Loading...
