NARDA EFA-200 - Page 153

EFA-200/-300 11 Remote control
11-19
Exporting data
Define / read coordinate ranking in matrix
C130 <p> C131 0 = XYZ
1= YXZ
2 = XZY
3 = ZXY
4 = YZX
5 = ZYX
Activate / read measured value recording
C226 <p> C227 0 = not activated
1 = activated
Deactivation:
Saves stored
measured values
in a data set
Save measurement point
C234 – – SAVE
Delete last measurement point
C236 – – DEL LAST
Read number of saved measurement points
– C239 0 to 8191 –
Write / action
commands
Read commands Range of values of p Meaning or units
of p
Read total number of data sets
– C243 0 0 to 4095 –
Read number of NORMAL data sets
– C243 1 0 to 4095 –
Read number of AUTO data sets
– C243 2 0 to 4095 –
Table 11-13 Remote control commands, exporting data
Table 11-12 Remote control commands, spatially arranged measurements