NARDA EFA-200 - Page 164

11 Remote control EFA-200/-300
11-30
Read “Exposure STD” enabled
– C107 1 0 = OFF
1 = ON
Read “Spectrum FFT / Harmonic Analysis” enabled
– C107 2 0 = OFF
1 = ON
5 Hz to 2 kHz
Read expanded frequency range enabled
(Spectrum FFT / Harmonic Analysis modes only)
– C107 3 0 = OFF
1 = ON
5 Hz to 32 kHz
Read “Exposure SFD” enabled
– C107 4 0 = OFF
1 = ON
Execute / read visible alarm signal test
C110 <p> C111 0 = OFF
1 = ON
Execute / read audible alarm signal test
C112 <p> C113 0 = OFF
1 = ON
Table 11-24 Remote control commands, test / service