7 Measurement data memory EFA-200/-300
7-6
7. Press key F1.
• The measurement starts immediately and runs until the data memory
is full (max. 24 hours).
• The STOP function is no linger shown in the display.
• The number of data sets MEM already saved and the last
measurement value saved are displayed.
• Progress of the measurement can be observed.
• Keys F1 and F4 change function.
– F1: no function
– F4: BREAK – breaks off the measurement sequence
Breaking off the measurement
⇒ Press key F4.
The measurement stops.
The data pool containing the recorded measured values is saved as a
data set.
Possible faults
Error message “NOT ENOUGH MEMORY” appears.
The available memory space is insufficient for the programmed
measurement for the selected time period.
1. Press the ESC key to return to the MEM AUTO menu.
2. Delete unwanted data sets or the entire data memory.
Deleting data: see page 7-18
– or –
1. Press the ESC key to return to the MEM AUTO menu.
2. Check the STEP time setting.
To Next Page
Loading...
