3. Press Button 5 (CHANNEL) to display the Channel properties or Button 6 (PLUG-IN) to
display the Plug-in slots of the selected Sound, Group or the Master.
4. Press Button 7/8 to navigate the Channel properties or Plug-ins (the name of the selected
Channel properties or Plug-in appears between the left and right arrows under Button 7
and 8).
Upon your selection the parameters of the selected Channel properties or Plug-in are
shown on the displays of your controller.
5. Use the Page buttons to navigate through the Parameter pages of the selected Channel
properties or Plug-in.
Whenever there is more than one page, it will be shown on the right side of the right dis-
play like this:
Moreover, if there is another page available to the left or to the right of the current page,
the corresponding Page button will be half lit on your controller.
Basic Concepts
Common Operations
MASCHINE - Manual - 44
To Next Page
Loading...
