1. Press and hold SCENE to enter Scene mode.
2. Press Button 7 and 8 to select the desired Scene bank.
3. Press the pad corresponding to the Scene you want to delete. Alternatively you can select
the Scene by pressing the Page buttons.
4. Press Button 6 (DELETE).
→
The Scene is deleted with all its Clips. The next Scenes shift ahead to fill the gap.
Alternate Method
1. Press and hold SCENE to enter Scene mode.
2. Press Button 7 and 8 to select the desired Scene bank.
3. Press ERASE + the pad corresponding to the Scene you want to delete.
→
The Scene is deleted with all its Clips. The next Scenes shift ahead to fill the gap.
If the desired Scene bank is already selected (or if there is only one Scene bank), this
alternate method can be simplified as follows: Press ERASE + SCENE + pad to delete
the corresponding Scene!
You can also delete Scenes in Scene Arrange mode: press ARRANGE then Button 1
(SCENE) to enter Scene Arrange mode, then follow either of the procedures described
above.
Deleting Scenes on the Controller
To delete a Scene on your controller:
1. Press and hold SCENE to enter Scene mode.
2. Press Button 7 and 8 to select the desired Scene bank.
3. Press the pad corresponding to the Scene you want to delete. Alternatively you can select
the Scene by pressing the Page buttons.
4. Press Button 6 (DELETE).
Creating a Song Using Scenes
Managing Scenes
MASCHINE - Manual - 716
To Next Page
Loading...
Need help?
General
