Native Instruments Maschine - Page 717

→
The Scene is deleted with all its Clips. The next Scenes shift ahead to fill the gap.
Alternate Method
1. Press and hold SCENE to enter Scene mode.
2. Press Button 7 and 8 to select the desired Scene bank.
3. Press ERASE + the pad corresponding to the Scene you want to delete.
→
The Scene is deleted with all its Clips. The next Scenes shift ahead to fill the gap.
If the desired Scene bank is already selected (or if there is only one Scene bank), this
alternate method can be simplified as follows: Press ERASE + SCENE + pad to delete
the corresponding Scene!
Deleting Scenes on the Controller
To delete a Scene on your controller:
1. Press and hold SCENE to enter Scene mode.
2. Press SHIFT + Left/Right Arrow to select the desired Scene bank.
3. Press the pad corresponding to the Scene you want to delete.
4. Press F3 (DELETE).
→
The Scene is deleted with all its Clips. The next Scenes shift ahead to fill the gap.
Alternate Method
1. Press and hold SCENE to enter Scene mode.
2. Press SHIFT + Left/Right Arrow to select the desired Scene bank.
3. Press ERASE + the pad corresponding to the Scene you want to delete.
→
The Scene is deleted with all its Clips. The next Scenes shift ahead to fill the gap.
Creating a Song Using Scenes
Managing Scenes
MASCHINE - Manual - 717