NEC Electra Elite IPK II System - Page 1022

Document Revision 4C Electra Elite IPK II
2 - 998 Trunk Groups
 21-01-05 System Options for Outgoing Calls – Dial Tone Detection Time
If dial tone detection is enabled, the system waits this time (0~64800 seconds) for the Telco to
return dial tone. When the interval expires, the system assumes dial tone is not present. To
disable this time (and have the system wait continuously), enter 0.
(default: 3)
Operation
To place a call over a trunk group:
1. At the multiline telephone, press Speaker.
- OR -
At the single line telephone, lift the handset.
2. Dial 704.
3. Dial trunk group number (1~9 or 001~100).
4. Dial number.
- OR -
1. Press the Trunk Group key (PRG 15-07 or SC 752: 02 + group).
2. Dial the number.
To answer an incoming trunk group call:
1. Lift the handset.
2. Press the flashing Trunk Group key.