NEC Electra Elite IPK II System User Manual

Electra Elite IPK II Document Revision 4C
Clock/Calendar Display 2 - 223
Clock/Calendar Display
Description
The system uses Clock/Calendar Display for:
Using the Daylight Savings Setup program, you can determine whether the system should automatically
adjust the system time for daylight savings time/standard time changes.
Clock Adjustment
The system can be programmed to automatically adjust the system clock nightly. This feature allows you
to make adjustments should the system cabinet regularly lose or gain time.
Conditions
 The system retains the Clock/Calendar Display after a power failure or system reset.
 Changing the time may change the current Class of Service (COS) service depending on
the COS mode setup.
 You can program the system to automatically switch modes.
 Single line telephone users cannot set the time and date.
Enhancements
Version 1600 and Version 2100 or higher:
 The default settings in Program 10-24 are updated to support the new Daylight Savings requirement.
 Central Office Calls (Access Maps)  Station Message Detail Recording
 Class of Service (Class)  System Reports
 Direct Inward Lines  Toll Restriction (Class)
 Display Telephones  Trunk Group Routing
 Night Service (Automatic)  Voice Mail
 Programmable Trunk Parameters  Voice Response System
 Ring Groups

NEC Electra Elite IPK II System Specifications

General

Brand	NEC
Model	Electra Elite IPK II System
Category	Telephone System
Language	English